Currently, LED strip customization is very flexible. Because different schemes vary greatly in hardware, effects, and installation, I cannot generate images directly here. However, I can break down the core dimensions of customization for you in detail and provide examples. You can use this information to visualize the desired effect.
🔧 Core Customization Dimensions and Scheme Examples
Customization usually involves combining the following dimensions:
| Customization Dimension | Common Options and Examples | Characteristics and Application |
|---|---|---|
| 1. LED Type and Color | Single-color White Light: e.g., 3000K Warm White, 4000K Neutral White, 6000K Cool White | Basic lighting, used for kitchen cabinets, shelves, etc. |
| Single-color RGB (Red, Green, Blue tri-chip LED) | Creates colored light by mixing via a controller, used for ambiance. | |
| Dual White Color Temperature (e.g., 2700K/6500K LEDs on the same strip) | Color temperature can be adjusted seamlessly (from warm to cool white), used for bedrooms, studies. | |
| High CRI Strips (CRI>90, e.g., COB Strips) | Excellent color rendering for true color reproduction, used in museums, jewelry displays, high-end homes. | |
| 2. Size and Density | Width: Common options like 5mm, 8mm, 10mm. | Narrower strips are easier to conceal. |
| Length: Customized by the meter, can be precise to the centimeter. | Perfectly matches on-site dimensions. | |
| LED Density: e.g., 30, 60, 120 LEDs/meter. | Higher density provides more uniform and full light. | |
| 3. Control Method | RF Wireless Remote | No line-of-sight needed, convenient control, mainstream for homes. |
| APP/Smart Control (Wi-Fi, Bluetooth Mesh) | Can integrate into smart home systems for voice control and scene automation. | |
| DMX512 Control | For professional stages, architectural lighting, allows pixel-level programming. | |
| 4. Installation & Environment | IP Rating: IP20 (non-waterproof), IP65 (dustproof, protected against water jets), IP67 (protected against temporary immersion). | Outdoor and bathroom use requires waterproof grades. |
| Power Supply: Low Voltage 12V/24V (requires driver), High Voltage 220V Direct Drive. | Low voltage is safer; high voltage allows for longer runs. |
💡 Visualization of Three Typical Custom Schemes
You can use the table below to conceptualize the key effects of different schemes:
| Scheme Name | Core Customization Points | Effect & Application Visualization |
|---|---|---|
| Scheme A: Home Floating Ceiling (Recessed Lighting) | Strip Type: High CRI, Dual-color-temperature COB Strip Control: Smart APP Control Installation: Installed in ceiling trough | Imagine: A uniform, soft light band appears on the ceiling. You can switch between “sunset warm yellow” and “morning cool white” via your phone, creating different home atmospheres. |
| Scheme B: Commercial Window Outline Lighting | Strip Type: High-brightness RGB Strip Control: DMX512 Programmable Control Installation: IP65 waterproof, installed along window frame | Imagine: The strip can display dynamic flowing colors, gradients, or sync with music, powerfully attracting street attention. |
| Scheme C: Study Shelf Reading Light | Strip Type: Single-color High CRI Natural White (4000K) Strip Control: Touch switch or simple dimmer knob Installation: Adhered under the front edge of the shelf | Imagine: Light reflects off the shelf and diffuses downward, providing bright, glare-free, shadowless comfortable lighting for books. |
📝 How to Start Your Custom Project
To get an accurate proposal and quote, it is recommended to prepare by following these steps:
- Define Requirements: Where will it be used? (Feature wall, cabinet, outdoor sign?) Primary purpose? (Basic lighting, wall washing, ambiance?) Is dimming or color changing needed?
- Measure Parameters: Precisely measure the installation length and the dimensions (width & depth) of the space for concealing the strip. This directly determines the available strip models.
- Find Suppliers: Search for “LED strip customization” on e-commerce platforms or in professional lighting markets. Communicate the above requirements with customer service. You typically need to specify length, LED type, color, control method, and IP rating.
- Request Samples: For important projects, it is highly recommended to purchase a small sample first to test the light effect, brightness, color, and installation method. Place a bulk order only after confirmation.
If you can inform me of the specific application scenario and desired effect, I can provide more targeted suggestions and details to note.
Add:No.1 Gaosantan West Road,Xia Village Hetang Town Pengjiang District,Jiangmen City,Guangdong Province,China .
Tel:+86-750-3711789 Fax:+86-750-3711799
Cell/Wechat:+86-18877561250
E-Mail:kendymomj@163.com / kendymomj@gmail.com
Http:www.kdshine.com