When choosing and using LED strips, it is important to understand their technical specifications and the correct way to use them. Especially for COB strips (Chip On Board), here are some common questions and their answers, which will help you better understand and use COB strips. This article will answer several common questions about COB strips in detail and provide practical suggestions.
- COB Strips: Low vs. High Voltage Options
When choosing COB strips, you may find that most products are low voltage 12V or 24V. Indeed, most COB strips are designed to be low voltage, and the purpose of this is to ensure safety and easy installation. Low voltage COB strips, such as the common 12V and 24V versions, are very suitable for home and commercial environments, especially in occasions where frequent touches and changes to settings are required. 12V/24V led strip light cob is popular in the market because they are easy to install and very safe.
However, there are also high-voltage COB light strips available on the market, which have an operating voltage between 110-220V. High-voltage 220V COB light strips are usually used in some special occasions, such as large commercial lighting projects or places where longer connection distances are required. Although these light strips are more complicated to install and wire, they provide irreplaceable convenience and practicality in some cases.
For example, in the application scenario of 110-220V cob light strip, high-voltage COB light strips can reduce the complexity of wiring and improve installation efficiency. Choosing the right voltage type depends on the specific use environment and needs.
- Can COB Strips Be Dimmed? Need a Controller?
COB light strips can be dimmed. This feature makes COB light strips very flexible in a variety of applications, from home lighting to commercial displays, you can adjust the brightness as needed to achieve the best effect. To achieve dimming of COB light strips, you usually need to configure a suitable controller. The type and function of the controller will affect the dimming effect, so it is very important to choose a high-quality controller.
![COB led strip light KIT](https://i0.wp.com/kdshine.com/wp-content/uploads/2024/02/COB-led-strip-light-KIT-1.jpg?resize=800%2C800)
When using led cob dimmer strip for indoor, the dimming function is particularly important. Most LED controllers can adjust the brightness of the light strip through remote control or smartphone applications, and some also have advanced features such as color change and dynamic mode. Using a controller not only makes it convenient to adjust the light, but also prolongs the life of the COB light strip, because proper dimming can reduce the workload and heat accumulation of the lamp beads.
When you install cob flex strip light 24V, it is particularly important to choose the right dimming controller. Make sure the controller is compatible with the light strip and can provide a smooth dimming effect. In addition, correct installation and connection can also ensure the normal operation of the dimming function.
- How to Safely Cut COB Light Strips ?
Correctly cutting COB light strips is a key step to ensure that they work properly. Before cutting, please read the product manual of the light strip carefully to determine the cutting position. Most COB light strips are marked with cutting marks at specific locations, which are usually indicated by small scissors patterns or specific symbols. Cut only at these marks to ensure that the light strip can still work properly after cutting.
![COB led Strip Light Installation Steps 002](https://i0.wp.com/kdshine.com/wp-content/uploads/2024/01/COB-led-Strip-Light-Installation-Steps-002.jpg?resize=800%2C800)
Use sharp scissors or professional cutting tools to carefully cut the light strip along the marked lines. Never cut it at will, as this may damage the internal circuit and cause the light strip to not work properly. After cutting, if you need to reconnect, you can use a special connector or welding tool, but make sure the connection is firm to prevent short circuits or looseness.
For those who buy China vendor cob strip light, it is particularly important to read the installation instructions carefully and make the correct cutting and connection. Choosing high-quality connectors and welding tools can ensure that the light strip can still work properly after cutting and can provide consistent light output.
- Will COB light strips have flicker?
Flicker refers to the flickering phenomenon of light between frequent switches, which not only affects the lighting effect, but may also have a negative impact on vision. For COB light strips, flicker is usually related to the quality of the power driver. A high-quality power driver can provide a stable current and reduce flicker, thereby providing a more comfortable lighting experience.
Choosing high-quality COB light strips and reliable power drivers can effectively avoid flicker problems. If you find that the light strip has flicker, first check whether the power supply and connection are normal. If the problem is still not solved, it is recommended to replace the power driver or consult a professional technician for help.
Especially for cob light strip manufacturer in China, many manufacturers provide high-quality products and after-sales service such as Meiji Lighting. If you encounter flickering problems, you can contact Meiji Lighting suppliers for technical support to ensure that the light strip can provide a stable light source.
Summary
Through the answers to the above common questions, you should have a more comprehensive understanding of COB light strips. Whether it is choosing the right voltage, achieving dimming effects, correctly cutting light strips, or avoiding flickering problems, you need to pay attention to product quality and installation skills. I hope this article can provide you with practical guidance when using COB light strips, ensuring that you can give full play to its advantages and enjoy high-quality lighting effects.
If you have more questions or need further help, welcome to contact suppliers specializing in the production of COB light strips, such as Meiji Lighting, the top manufacturer of light strips in China, who can provide you with comprehensive technical support and high-quality product selection.
By cooperating with a professional cob light strip manufacturer in China, you can not only get high-quality products, but also enjoy excellent after-sales service to ensure that your COB light strips are always in the best working condition.
Through this article, we hope that you can better understand and use COB light strips. Whether it is for home or commercial use, this knowledge can help you choose and install the most suitable products and enjoy high-quality lighting effects.